Hyper Terminal
- Connect the WARP board to the host computer via a comm cable.
- Open Hyper Terminal.
- Give it some name under the "Name" form. You can assign it an
icon as well. If you don't care to save this connection, just give it
any name with any icon. Click "OK."
- In the next dialog, select "COM1" next to the "Connect Using" (or
whatever comm port you're using to connect to the board). Click "OK."
- In the COM1 Properties box, select 57600 Bits per second, 8 Data bits, None Parity, 1 Stop bits, and None for Flow Control (the only things to change from default should be the "Bits per second" and "Flow control" settings). Click "OK."
iMPACT
- Download bitstream for Virtex-4 based boards.
- Rename the bitstream download.bit.
- Open iMpact (start->All Programs->XilinxISE Design Suite 10.1->ISE->Accessories->iMpact).
- Select "create a new project (.ipf)" at the iMACT Project dialog box. Click "OK."
- Select "Configure devices using Boundary-Scan (JTAG) in the next window. Click "Finish."
- The next dialog that pops up requests a configuration file for the Xilinx block. Click "Bypass."
- The next dialog that pops up requests a configuration file for the Vitex-4 chip. Open your download.bit bitstream.
- Click "OK" in the Add Virtex-/II Pro/Virtex4 Object Files dialog (there are no "BMM" or "Power PC Software Files" needed).
- Select the device corresponding to your Virtex chip under "Boundary Scan" in the Device Programming Properties dialog. Click "OK."
- Right-click the box that corresponds to your Virtex chip and select "Program."
You should see a blue form that says "Program Succeeded." If everything went smoothly.
NOTE 1: If the Programming Properties dialog opens after you select "Program" in step 11), you screwed up step 10) by not selecting your Virtex chip. Select it now in this dialog box and click "OK." Try not to screw up in the future. It makes you feel stupid.
If everything went correctly, Hyper Terminal should be displaying "WARP Radio Calibration - Main Menu."
- Select the radio to test. In our specific case, the only radios connected are radios 2 and 3. Radios 1 and 4 are absent.
- Select 2 for Tx DC Offset Calibration.
- Select "q" to return to the main menu and select another radio to test.
NOTE 3: In the case of testing absent radios, usually "Best I" and "Best Q" will display nonsensically high or low values, like +/-200. "Normal" values would be something within the range of +/-100.
For the project at hand, these values are needed in exd_hostname.h under the exa_d2d_lib directory.